Product Overview:
This 20m³ electric rope shovel is the one with the smallest capacity out of all models in our product range. However, electric rope shovel is still of the same high quality as the big ones that are used in a heavy open-pit mine. The machine is equipped with an AC IGBT electric drive which not only powers the machine but also brings several benefits to the machine as compared to a diesel machine:
By having less movable parts and a simpler drivetrain, the machine's availability is increased.
Operating costs are reduced due to the absence of fuel consumption and the extension of maintenance intervals.
Besides, the machine emits far less noise and fewer pollutants, thus making it a perfect solution for mines that have tough environmental regulations.
In addition, the digging cycles are faster, and therefore the overall loading efficiency is higher.
The standard bucket and the chain assembly are installed on the machine. In addition, if the volume of the bucket is less than 20m³, it can be changed. We make a change in the configuration depending on ore density, digging depth, stripping difficulty, and the haulage equipment that is to be used.
Why an Electric Rope Shovel?
Enhanced Safety The safety of the machine (just to mention the main ones) is ensured by features such as overload protection, swing limiters, emergency-stop controls, and full-view camerafield. These measures help the safety of operators who work in a continuous mining environment that is tough.
Improved Operator Comfort The operator's cab comes with a floating anti-vibration system. It effectively isolates the noise and vibrations of the outer world from the inside, thus it keeps the operator fresh even after a long shift.
Durable Design The primary load-bearing parts are constructed from high-strength alloy steel and are completely welded. It strengthens the machine's resistance to the wear caused by heavy, repetitive digging cycles.
High-Reliability Mining Wire Rope The wire ropes we use are built for continuous cycling and high-impact operations. They provide very good resistance to fatigue and thus can always be trusted even in the most difficult situations.
electric mining shovel
mining rope shovel
rope shovel excavator
rope shovel machine
Parameters:
| Parameter Name | Value / Description |
| Ground Bearing | Adaptable to specific site conditions |
| Standard Track Width | 28.22 inches |
| 28.22 inches | 39 inches |
| Overhead Width | 41.33 inches (includes personnel access) |
| Travel System | Dual-motor independent planetary drive |
| Swing Mechanism | Parallel shaft gearboxes (dual-side) + horizontal motor drive |
Spare-Parts Availability Without Limit
We provide parts that are vital for the smooth operation of the machines, such as:
Wear parts
Gears and reducers
Wire ropes
Bucket components
i.e., the parts that are most indispensable for the machine to always be in a working condition in mines where the demand is high.
Energy-Saving Electric Drive:
Through the utilization of this electric drive system, the equipment is able to deliver high power density with less energy consumption and simultaneously, it lowers the noise level and the pollutant release. This technology fully complies with all the modern mining standards both in
terms of environmental protection and energy-saving. Where This Shovel Works Best
The 20m³ rope shovel is basically the tool of the following mining industries:
Open-pit coal mines with a production capacity of 100,000 to 1,000,000 tons of coal annually Ore mines for iron, copper, gold, and other metals Removal and loading of overburden after hard-rock blasting Dust-intensive, impact-intensive, and generally heavy-duty workplaces
Mining that operates 24/7 with only short breaks or no breaks at all Mines of construction materials and quarries.
It is especially very good for mines where frequent cycling, heavy loads, and expensive downtime are characteristics.
FAQ:
Q1: Is it possible to enlarge the bucket?
Sure thing. With the condition that ore density and the corresponding loading equipment are considered, we can increase the bucket volumes from 20m³ to 35m³ or even more.
Q2: Do you support installation and commissioning?
Yes. We can provide on-site installation and commissioning service if local support is needed, and remote guidance and technical support can also be arranged if the project is of high complexity or large scale.
Q3: Is the electric drive system that needs special maintenance?
Not really. This system is more straightforward in its routine maintenance than the diesel ones. The regular inspections are mainly concentrated on the motors, lubrication points, wire ropes, and chains.
Q4: Are you in a position to deliver spare parts and maintenance kits?
Indeed. We offer complete spare parts kits that cover a full range of components such as gears, reducers, wire ropes, cutting edges, and chain assemblies.
Q5: Could you rearrange our mine structure to suit your model?
Sure thing. We very frequently change the strength of the structure, the sealing, the cooling, and the design of the bucket ingredient-wise of ore hardness, digging depth, and temperature.
About Our Factory:
We buy the steel that is necessary for the products from big mills like Angang and Baosteel and each of them has extensive material test reports attached. Our engineering department has 15 engineers, 5 of whom are senior engineers with deep experience in the designing of mining equipment and structural optimization. We have been involved in the export of mining equipment to countries such as Australia, Indonesia, Russia, the South America region, the Middle East, and more than 20 other countries for several years.We understand different mining environments, types of rocks, and local rules and regulations. Moreover, we provide long-lasting spare parts solutions and the best technical services to our clients.
